亚洲自偷自偷图片自拍

<output id="jtmtp"></output>

<center id="jtmtp"></center>
        1. 聯系我們
          你的位置:首頁 > 公司產品 > 伸縮接頭

          Good quality ductile iron dismantling joint

          更新:2017-3-17 9:13:03 點擊:
          • 品牌 runtaida
          • 型號
          產品介紹

          Packaging & Delivery

          Packaging Details: Ductile iron dismantling joint is packed by plastic film,then fixed into standard export wooden case
          Delivery Detail: 1.In stock: Immediately 2.Sample: 2 days 3.OEM/ODM: 3-15 Days

          Good quality ductile iron dismantling joint


          Product Overviews

          Introduction of ductile iron dismantling joint :

          Dismantling Joint are composed of a main body, sealing ring, gland, telescopic tube and other main components, applicable to flange connection, during the installation, adjust the length between flange and both ends of product, diagonal uniform tightening, gland bolt, make them as a whole, keep a certain displacement distance,during the installtion and maintenance, it'll be convenient for adjust size according to site . In the work , it can be anti-axial thrust transmission to the entire pipeline.


          Usage and applicationof ductile iron dismantling joint : 

          Protecting piping and equipment system from stress or motion; It's suitable for conveying the steam which temperature not higher than 250 degrees and granular powder and other media such as sea water, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air, gas etc.


          Material of ductile iron dismantling joint
          No. Name Quantity Material
          1 Cover 2 QT400-15, Q235A, ZG230-450, 1Cr13,20
          2 Sleeve 1 Q235A,20 , 16Mn, 1Cr18Ni9Ti
          3 Gasket 2 NBR, CR, EPDM, NR
          4 Bolt n Q235A, 35, 1Cr18Ni9Ti
          5 Nut n Q235A, 20, 1Cr18Ni9Ti


          Main connecting dimension of ductile iron dismantling joint
          Nominal diameter (DN) External diameter External dimension N-tH.
          Length D 0.25-1.6 Mpa 2.5-6.4 Mpa
          L1 L
          65 76 180 208 155 4-M12 4-M12
          80 89 165
          100 108 195
          100 114 195
          125 133 225
          125 140 225 4-M16
          150 159 220 255 4-M16 6-M16
          150 168 255
          200 219 310
          225 245 335
          250 273 223 375 6-M20 8-M20
          300 325 220 273 440 10-M20
          350 355 490 8-M20
          350 377 490
          400 406 540
          400 426 540
          450 457 590 10-M20 12-M20
          450 480 590
          500 508 645
          500 530 645
          600 610 750
          600 630 750
          700 720 855 12-M20 14-M20
          800 820 290 355 970 12-M24 16-M24
          900 920 1070 14-M24 18-M24
          1000 1020 1170 14-M24 18-M24
          1200 1220 1365 16-M24 20-M24
          1400 1420 377 1590 18-M27 24-M27
          1500 1520 1690 18-M27 24-M27
          1600 1620 1795 20-M27 28-M27
          1800 1820 2000 22-M27 30-M30
          2000 2020 2200 24-M27 32-M30
          2200 2220 400 2420 26-M30  
          2400 2420 2635 28-M30  
          2600 2620 400 2835 30-M30  
          2800 2820 3040 32-M33  
          3000 3020 3240 34-M33  
          3200 3220 3440 36-M33  
          3400 3420 490 3640 38-M33  
          3600 3620 3860 40-M33  
          3800 3820 500 4080 40-M36  
          4000 4020 4300 42-M36  

          We are specialized in the production of dismantling joint , suitable for pressure level 0.25-6.4Mpa pipeline. Common models range from DN50 to DN3200, joints in GB standard are available, the spot can be shipped on the same day, uncommon models can be customized to 3-5 days delivery.






          更多產品
          亚洲自偷自偷图片自拍
          <output id="jtmtp"></output>

          <center id="jtmtp"></center>